RCSparks Studio Community - RC Drifting http://www.rcsparks.com/forum/ en Wed, 19 Jun 2013 05:21:24 GMT vBulletin 60 http://www.rcsparks.com/forum/images/misc/rss.png RCSparks Studio Community - RC Drifting http://www.rcsparks.com/forum/ rc drift car problem. http://www.rcsparks.com/forum/rc-drifting/24605-rc-drift-car-problem.html Fri, 14 Jun 2013 19:05:41 GMT hi guys i have a tamiya ta05 1st gen.. i had it... hi guys i have a tamiya ta05 1st gen.. i had it for a month now. i am just learning to drift. it runs a stock tamiya silvercan motor, tamiya teu 101 bk esc and axial ax3 radio and receiver.. i used a ax3 because its the only radio we had.. as i was learning to drif i see that he ax3 is not a bad radio.. but the last time i drifted lol if that word is right XD i was turning a corner but suddenly the car controlled itself it was on full throttle all the time and i could not control the steering since the the car was like that. every time i turn it on i works for atmost 30 seconds and sometimes it goes full throttle sometimes when you turn the steering it controls the throttle but everything on the reciever is wired up correctly.. i hope you can help me.. thanks. ]]> RC Drifting theliryc http://www.rcsparks.com/forum/rc-drifting/24605-rc-drift-car-problem.html Update on My E10 Drift Car http://www.rcsparks.com/forum/rc-drifting/24527-update-my-e10-drift-car.html Wed, 12 Jun 2013 00:36:13 GMT Got some new parts for my S13! I installed them... Got some new parts for my S13! I installed them and thought I would provide y'all with some pictures. Doesn't look that bad. Leave me some feedback as well suggesting some things I need to do.

Also I have two bodies: Evo 10, Skyline R34. I just can't find any rims to work with them. Any suggestions would be much appreciated.

Thanks All!


New Aluminium Drive Shaft

New Arm Set (Front and Back)





Nissan Skyline R-34

Mitsubishi Evo '10 ]]> RC Drifting J0E http://www.rcsparks.com/forum/rc-drifting/24527-update-my-e10-drift-car.html having a hard time getting it sideways http://www.rcsparks.com/forum/rc-drifting/24410-having-hard-time-getting-sideways.html Sat, 08 Jun 2013 00:39:05 GMT I've got a nitro RS4 that was bastardize and im slowing getting it back to stock ish with the odd mod or change here and there. Now I have the front diff with the limiting spring in it and the rear is locked right up. I have a softer spring in the front shock and it seems like a really hard spring in the rear. Now what can I do to make this go sideways?? oh and another note theres a crap .15 engine in it.:faill: ]]> RC Drifting Jackedman http://www.rcsparks.com/forum/rc-drifting/24410-having-hard-time-getting-sideways.html My Drift Car http://www.rcsparks.com/forum/rc-drifting/24394-my-drift-car.html Fri, 07 Jun 2013 04:25:07 GMT Hello everyone, I'm new to RCSparks.com, but i'm enjoying already. I'm new to the RC world as well, I satarted off with and HPI E10 Drift car, I've had it for about two weeks. Here are some pictures of it. Hope you enjoy.




]]> RC Drifting J0E http://www.rcsparks.com/forum/rc-drifting/24394-my-drift-car.html HPI E10 Converted to FULL RWD Car. help http://www.rcsparks.com/forum/rc-drifting/24359-hpi-e10-converted-full-rwd-car-help.html Wed, 05 Jun 2013 18:32:22 GMT Hey guys I attempting to tackle the full 100%... Hey guys

I attempting to tackle the full 100% rwd setup drift car on my e10. Only removed the front dogbones from the diff. Its been said that it will be quite a hard transition from 4wd to rwd

I was practicing last night for the first time since its been raining here. All i was doing was just spinning out and couldn't grab traction at all. Might be due to my the drift tires.

I was wondering how to setup the car for full rwd driftng? Where to add weight to the chassis? And also tire compound?

Thanks in advance everyone

Someone should hold session/meet in calgary ]]> RC Drifting NUE NRG http://www.rcsparks.com/forum/rc-drifting/24359-hpi-e10-converted-full-rwd-car-help.html HPI Sprint 2 Drift http://www.rcsparks.com/forum/rc-drifting/24291-hpi-sprint-2-drift.html Mon, 03 Jun 2013 03:20:12 GMT I have had my HPI Sprint 2 Drift for atleast a... I have had my HPI Sprint 2 Drift for atleast a year now and I was wondering, what kind of upgrades should I think of getting. I already ordered some tires off of HPI.com and some tire glue, and wheels. Other than that, I don't know what else to upgrade besides the body for it but I haven't really given some thought on what else I should consider upgrading. If you guys have any information on what I should add to my Sprint 2 Drift aka Sideways ( I named him LOL :yo !: ). I'm thinking about upgrading the shocks if that is necessary. Beside's shocks, bodies, tires, and battery's, what else should I consider upgrading on Sideways. Thanks a ton guys.

- Jackson ]]> RC Drifting purplehippo4 http://www.rcsparks.com/forum/rc-drifting/24291-hpi-sprint-2-drift.html 1st Drifter http://www.rcsparks.com/forum/rc-drifting/24265-1st-drifter.html Sun, 02 Jun 2013 14:03:04 GMT I thought I would like Drifting so I bought a HPI... I thought I would like Drifting so I bought a HPI E10,had this body sprayed by a pro,saw it,Drifted with it thru 1 pack Drifting was not for me,but love this truck. Its now sits in my bedroom on my nightstand(wife not happy). I'll never sell it,trade it. I rob parts off it when needed but allways replace them. I like to watch you guys Drift but its not for me.
Attached Images
]]> RC Drifting 2manytoysdav http://www.rcsparks.com/forum/rc-drifting/24265-1st-drifter.html MY NEW drift car Sakura D3 first drift video http://www.rcsparks.com/forum/rc-drifting/24104-my-new-drift-car-sakura-d3-first-drift-video.html Tue, 28 May 2013 01:51:47 GMT THIS are the equipment that I use 540motor 320A... THIS are the equipment that I use 540motor 320A ESC very ordinary Servo GT3B remote control In fact this video was made in last week and hope you like it!!!!
]]> RC Drifting v8racecar http://www.rcsparks.com/forum/rc-drifting/24104-my-new-drift-car-sakura-d3-first-drift-video.html New Car/Broken Car! http://www.rcsparks.com/forum/rc-drifting/24010-new-car-broken-car.html Sat, 25 May 2013 00:10:49 GMT I got a new driftcar for my birthday a while... I got a new driftcar for my birthday a while back. I am experimenting with Exceed rc so I got the 1/10 MadSpeed Brushless car. It has a 380 3000Kv Brushless motor and Its a really fun car.. I just don't like some stuff on it. Mostly everything is plastic. Even the diff gears are plastic. Its really weird. I have a driftstar and a lot of things on it are aluminum even though its a brushed car.

I was doing some speed runs and its pretty fast!! I wanted to have some fun with it so I jumped my curb with it. (My curb is weird. It looks like a gutter for the rain water) So I jump the curb, it turns sideways, flips about 10+ times and the center dogbone some how comes out.

I got some fixing to do :D ]]> RC Drifting Supradrifter http://www.rcsparks.com/forum/rc-drifting/24010-new-car-broken-car.html Help! RC Drift Tires http://www.rcsparks.com/forum/rc-drifting/23993-help-rc-drift-tires.html Thu, 23 May 2013 23:27:16 GMT hi everyone.. i got a tamiya TA05 recently and... hi everyone.. i got a tamiya TA05 recently and now i got a problem... does anyone know how to make rc drift tires? i went to the hardware today and saw some 2 inch abs pipes. now the only problem is cutting the pipes. i was looking for a pipe cutter but they had none for the size of the pipes.then the guy just pointed me a hack saw.. is it possible to make drift tires using a hack saw? the how about the edges of the tire.. im just a 16 yr old and dont have any power tools... can i make them round edged if i use a sandpaper? pls help me i dont to spend 20 bucks on drift tires because i drift everyday XD well what can you do if you got bitten by the drift bug? XD if anyone has any ideas pls share them.. i really need help.. thankyou in advance =)) ]]> RC Drifting theliryc http://www.rcsparks.com/forum/rc-drifting/23993-help-rc-drift-tires.html lexan engine bay? http://www.rcsparks.com/forum/rc-drifting/23911-lexan-engine-bay.html Tue, 21 May 2013 06:46:00 GMT Hey guys, seen a few drifters running lexan... Hey guys, seen a few drifters running lexan engine bays but I can seem to find them anywhere. Anyone know who makes them? Looking for a skyline r34 engine bay or something close.

thanks in advance ]]> RC Drifting PontiacGT201 http://www.rcsparks.com/forum/rc-drifting/23911-lexan-engine-bay.html Arizona Drift Club http://www.rcsparks.com/forum/rc-drifting/23438-arizona-drift-club.html Sun, 05 May 2013 05:37:11 GMT Hey guys if any of you watch my youtube channel... Hey guys if any of you watch my youtube channel you know I'm into scaling and bashing but I've decide to take on drifting so I bought a hpi sprint 2 flux and a team associated tc4 drift and I was sad to fine out there is no drift clubs in Arizona!!!! So I've decided to create my own. If anyone is a drifter and you live in Arizona tell me NOW, I don't know of any drift courses in Arizona but mabey we could build one cause we sure as hell need one! Untill next time see ya
-DezertRC ]]> RC Drifting DezertRC http://www.rcsparks.com/forum/rc-drifting/23438-arizona-drift-club.html hpi cup racer drift guys http://www.rcsparks.com/forum/rc-drifting/23307-hpi-cup-racer-drift-guys.html Tue, 30 Apr 2013 18:54:29 GMT I dont know how many people actually use this... I dont know how many people actually use this chassis but I love it. Ive built my hpi cup racer way too powerful to drift that on drift tracks I use rubber or the foam tires to control it. Had lots of set back with wheels exploding at speed and the rear diff just blowing apart. Last problem I had was with the plastic washer that holds the spur gear to the driveshaft rounding ouy from the pressure put on it. Soon I'll have my last 2 pieces to complete my solid metal driveline which are that spur gear washer thingy and the plastic piece the connects the drive shaft to the pinion gear. Also bought a spare front diff thats all metel to replace the rear plastic one. Once my pieces arrive I'll post pics and for the guys that need the stronger metal parts contact gary at customrcparts.com. hopefully I can get in the 100mph club with such a small car! ]]> RC Drifting mike16241 http://www.rcsparks.com/forum/rc-drifting/23307-hpi-cup-racer-drift-guys.html MST FX 2wd Drifter Concept http://www.rcsparks.com/forum/rc-drifting/23292-mst-fx-2wd-drifter-concept.html Tue, 30 Apr 2013 05:33:08 GMT Well last week MST decided to finally release a... Well last week MST decided to finally release a couple sample photos of there concept design on there 2wd drift chassis that will be coming out this year since info was leaked on it. There is no info about it at this time but as info is released I will update this thread with all new information about the chassis. So this is NOT the official design of it yet as its still in production stage and this is just the concept design.

This is one chassis I would say I am most excited about for this year as MST does make some pricey but good chassis so this is very much on my list. Enough that I have already contacted them and will be getting put on the pre-order list as soon as they have all the info ready and a final price on this chassis.






Photos where taking from this link below...

MST FX 2WD RC Drift Chassis concept - MAX SPEED TECHNOLOGY

The email I received from MST for pre-order
]]> RC Drifting Dribble http://www.rcsparks.com/forum/rc-drifting/23292-mst-fx-2wd-drifter-concept.html Video from Dot1Drift -Rd. 2 - danish championship http://www.rcsparks.com/forum/rc-drifting/23088-video-dot1drift-rd-2-danish-championship.html Wed, 24 Apr 2013 10:16:14 GMT Have a look at our newest video from Dot1Drift -... Have a look at our newest video from Dot1Drift - The danish RC Drift championship ;)





Here are our older videos:

Dot1Drift Rd. 1 - Bækmarksbro:



Esbjerg RC Drift track invitational:
]]> RC Drifting Jyttah http://www.rcsparks.com/forum/rc-drifting/23088-video-dot1drift-rd-2-danish-championship.html Drift Cars http://www.rcsparks.com/forum/rc-drifting/22970-drift-cars.html Sun, 21 Apr 2013 15:42:53 GMT Yeahh, got a couple drift cars, A cheap Exceed... Yeahh, got a couple drift cars, A cheap Exceed Driftstar and a HPI Flux 2! Man I love them! How bout you guys? BTW, im new to the forums just strted about 30 mins ago! ]]> RC Drifting Supradrifter http://www.rcsparks.com/forum/rc-drifting/22970-drift-cars.html My New chassie and body http://www.rcsparks.com/forum/rc-drifting/22693-my-new-chassie-body.html Sun, 14 Apr 2013 09:21:14 GMT My New Tamiya TRF417X.. Made an trade with my... My New Tamiya TRF417X.. Made an trade with my brand new Corally HMX 2012 model.. (SUCKS as a drift chassie)




]]> RC Drifting Felex http://www.rcsparks.com/forum/rc-drifting/22693-my-new-chassie-body.html Just finished the storm trooper EVO,but I already beat it up..lol http://www.rcsparks.com/forum/rc-drifting/22021-just-finished-storm-trooper-evo-but-i-already-beat-up-lol.html Sat, 30 Mar 2013 05:32:07 GMT Heres pics of the body I got today Image:... Heres pics of the body I got today



]]> RC Drifting tribalgt03 http://www.rcsparks.com/forum/rc-drifting/22021-just-finished-storm-trooper-evo-but-i-already-beat-up-lol.html The mst drift car if finally here!!!!!!!! http://www.rcsparks.com/forum/rc-drifting/21974-mst-drift-car-if-finally-here.html Thu, 28 Mar 2013 22:19:24 GMT Ok I havent even charged the battery yet,but had... Ok I havent even charged the battery yet,but had to post pics..lol





]]> RC Drifting tribalgt03 http://www.rcsparks.com/forum/rc-drifting/21974-mst-drift-car-if-finally-here.html Just got a tc4 from CL http://www.rcsparks.com/forum/rc-drifting/21848-just-got-tc4-cl.html Mon, 25 Mar 2013 18:47:33 GMT its not bad,but I think my flipped hpi works... its not bad,but I think my flipped hpi works better,but the tc4 has a pretty sharp turn radius,but still waiting on my MST :(


]]> RC Drifting tribalgt03 http://www.rcsparks.com/forum/rc-drifting/21848-just-got-tc4-cl.html Pics of my Drift car http://www.rcsparks.com/forum/rc-drifting/21836-pics-my-drift-car.html Mon, 25 Mar 2013 11:00:01 GMT Whats up everybody my names Kameron im still a... Whats up everybody my names Kameron im still a newbie to rcsparks. Well heres a pic of my hpi im still looking for a better kit, like a tc4 or even a yokomo dp but im stuck between trailing and drifting because there both awesome:haveaniceday:

]]> RC Drifting Kams http://www.rcsparks.com/forum/rc-drifting/21836-pics-my-drift-car.html