wats the best motor for a scx10 (dingo)

[Roman777NYC]

so i just got my dingo i will be turning it into a 2 motor. but right know i just want to have one. wat will be the best upgrade from the stock ?? plus im new in electreic trucks im only good in nitro so someone wats the difference between all the t moters . like t25 , t35 , t45 , t55 , t60

[Azrayel74]

I run dual 55 turn Axial motors in my SCX-10 rig... i get about 8MPH top speed... and massive crawling torque.... if i can get traction.. this truck can get there... i do run a single 35 Turn in my other SCX-10 which is my trail driver mostly.. no major problems with crawling capability with that one. SO a lot depends on what you want.. more turns = more torque and less speed... double motors... = double the torque... same speed... hope this helps

[Roman777NYC]

so lets say a 55t has more power (torq) but less speed and a 35t has less power (torq) but more speed. if thats it then thanx and why did medic run 2 35tand not 55t on his project ??

[CrawlHog]

so lets say a 55t has more power (torq) but less speed and a 35t has less power (torq) but more speed. if thats it then thanx and why did medic run 2 35tand not 55t on his project ??

you got it right, the higher the turns (60t) more torqe less wheel speed (35t) more speed less torqe. a 35t is a good motor if you want a little of both , speed ang torqe

[Roman777NYC]

thanx bro !!

[ElectrollRc]

yea the 35t is the way to go for crawling, but dual 55t motors is more of a puller/torque monster!