Separate names with a comma.
Your tranny gears are tore up
Heres the motor all you gotta do is plug her in...
Ditch the stock servo and give this one a try also add a glitch buster from ebay for about 6$ http://www.hobbypartz.com/33p-solarservo-d771.html
take the pinion down to about 25
After you tear it down clean lube and determine whats shot. If the diff gears are the problem then I would suggest:...
asiatees and boom racing are both really good suppliers as well as hobbyking if you stick mostly with there trackstar line and their gen 2...
that esc is a piece of crap the only way to program it so it useful is to do it through the remote also cogs horribly I would suggest one of...
http://www.amain.com/rc-cars/team-associated-tc4-club-racer-electric-1-10-touring-car-kit-pre-built-asc30101/p227233 This is a good one if your...
first of all have you ever welded before? If not your going to have a lot of problems. mig welding takes a lot of practice especially on small...
rear shocks up front help alot worse thing you will have to do is adjust the shock to acount for a lttle extra body roll in the turns
For a servo you might want to give these a try Solar Servo D770 High Voltage Low Profile .06sec@7.4v Digital Metal Gear 47g damn good servos for...
I have a heavily modified stampede run a 2350kv 1/8th scale motor and have shredded two sets of tranny gears completely the second time half the...
15 - 23 tooth pinion and 54-64 tooth spur use the nitro spurs
Ok, first off a 60 amp esc will barely run a rustler on pavement let alone sand. you should be running at least 100-120amp esc in it and if your...
