1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. Traxxasking13

    Traxxasking13 New Member

    Joined:
    Dec 30, 2015
    Messages:
    24
    Likes Received:
    0
    What types of oil can I use on my wheel bearings
     
  2. Y2daT

    Y2daT Over Powered RC
    ELiTE MEMBER

    Joined:
    Dec 25, 2013
    Messages:
    4,055
    Likes Received:
    1,090
    i usually spray pb blaster on them ...but most any thin oil will do ...like 3N1 oil or spray silicone lube ....
     
  3. Traxxasking13

    Traxxasking13 New Member

    Joined:
    Dec 30, 2015
    Messages:
    24
    Likes Received:
    0
    Do you have a recommendations for 2wd axels
     
  4. Y2daT

    Y2daT Over Powered RC
    ELiTE MEMBER

    Joined:
    Dec 25, 2013
    Messages:
    4,055
    Likes Received:
    1,090
    if they are not breaking leave them be ..heavier metal ones will put more strain on the motor and drive train ...
     
  5. Traxxasking13

    Traxxasking13 New Member

    Joined:
    Dec 30, 2015
    Messages:
    24
    Likes Received:
    0
    There worn pretty bad and warped
     
  6. Y2daT

    Y2daT Over Powered RC
    ELiTE MEMBER

    Joined:
    Dec 25, 2013
    Messages:
    4,055
    Likes Received:
    1,090
    see what you can find .... unfortunately the Rc you have is not intended for big power so upgrades may need to be outsourced from other compatible rc models . MIP makes steel CVD's for the traxxas slash /rustler and other models ... some of them may work for you.
     
  7. Y2daT

    Y2daT Over Powered RC
    ELiTE MEMBER

    Joined:
    Dec 25, 2013
    Messages:
    4,055
    Likes Received:
    1,090
    I recommend for a good mud rig get a axial model ...like a scx10 ... if your budget is too small you can go with a exceede maxstone 10 .... it is so similar to a scx10 over half of the parts are direct fit ...others require a bit of grinding to fit them
     
  8. Traxxasking13

    Traxxasking13 New Member

    Joined:
    Dec 30, 2015
    Messages:
    24
    Likes Received:
    0
    Ok thanks for the recomindation
     

Share This Page