1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Binding my radio

Discussion in 'Scale Truck Chat' started by MRFUZZYPANTS, Jul 30, 2014.

  1. MRFUZZYPANTS

    MRFUZZYPANTS New Member

    Joined:
    Jul 30, 2014
    Messages:
    19
    Likes Received:
    0
    hi guys i am still sort of new to rc and was just wondering because i have a spektrum dx4c if the receiver is compatible, could i use, say a 7 channel reciever to power some lights and such. because i am trying to hook up a 4 wheel steering system and the controller is only 4 channel and i also have a winch. so i need to have control from the radio to the winch and 2nd servo. thanks
     
    #1 MRFUZZYPANTS, Jul 30, 2014
    Last edited: Jul 30, 2014
  2. Antho11

    Antho11 Studio Forums Elite
    ELiTE MEMBER

    Joined:
    Jun 21, 2013
    Messages:
    3,516
    Media:
    115
    Likes Received:
    1,134
    I wanted to do the same thing but I read up that the surface products aren't compatible with the air products.
     
  3. Chunder

    Chunder Fixer
    ELiTE MEMBER

    Joined:
    Jan 28, 2011
    Messages:
    901
    Likes Received:
    18
    There's nothing stopping you from using an air receiver in a ground vehicle. A lot of people use them for the scale trucks and semis just because they have more channels.
     
  4. MRFUZZYPANTS

    MRFUZZYPANTS New Member

    Joined:
    Jul 30, 2014
    Messages:
    19
    Likes Received:
    0
    alright thanks guys
     

Share This Page