1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

hpi crawler king f350 build.

Discussion in 'Scale Truck Chat' started by Brandonclowe, Aug 27, 2013.

  1. Brandonclowe

    Brandonclowe New Member

    Joined:
    May 11, 2013
    Messages:
    41
    Likes Received:
    0
    [​IMG]would these fit?
     
  2. Brandonclowe

    Brandonclowe New Member

    Joined:
    May 11, 2013
    Messages:
    41
    Likes Received:
    0
    rusty is awsome were did you get your dif gears
     
    #42 Brandonclowe, Aug 28, 2013
    Last edited: Aug 28, 2013
  3. Koreyh2010

    Koreyh2010 Studio Forums Elite
    ELiTE MEMBER

    Joined:
    May 21, 2013
    Messages:
    303
    Likes Received:
    5
    Yes by all means put that 4600kv castle in there :D take a video of the first run before something breaks
     
  4. jaloos

    jaloos Mod, Staff Member and Ghetto Fabricator
    MODERATOR

    Joined:
    Oct 14, 2012
    Messages:
    2,959
    Media:
    133
    Likes Received:
    187
    Too be fair and with some of the earlier posts from you it would also be fair for those with these vehicles to tell you what it costs to make the vehicle do this on a consistent basis.

    I guarantee Azrayel74 has built this truck up very well to do this without parts loss. I can guarantee it wasn't cheap.
     
  5. bbwolf

    bbwolf Guest

    I was just about to add -
    In real numbers you will understand, and this is not to dissuade you from doing any thing... Some of the rigs you have looked at are close to the $1000 mark, and a few even more. Look around ebay, RC swap-meet's, or other place's that sell Used RC's and you will prices of $600 or so. This just so you understand, what you want to do can be done, but it's not cheap by any means.
     
  6. Azrayel74

    Azrayel74 Dr. Madness
    MODERATOR

    Joined:
    May 8, 2011
    Messages:
    1,339
    Likes Received:
    15
    Its been quite some time since I built that speed machine.. and even built up, with HD Diffs, and other good parts... shortly after I filmed this... I ripped one of the axle shafts out and split the rear axle in 2 pieces... Anything is possible... but the faster you build.. and go, the more parts your going to break.. that's the plain and simple truth.. specially in a rig like the SCX-10. Now I will admit.. it was one HELL of a good time , while it lasted... upgraded parts were definitely an option for me... I chose to tear it down and rebuild it into something else... BUT if this is truly what your looking to want to do... I can offer some suggestions for parts to make things a bit more durable. Hit me up with a PM if you want more info and ill gladly lookup and send you links for suggestions of parts.
     
  7. Brandonclowe

    Brandonclowe New Member

    Joined:
    May 11, 2013
    Messages:
    41
    Likes Received:
    0
    ok im staying with my hpi in a bit i got some pics.:B:
     
    #47 Brandonclowe, Aug 28, 2013
    Last edited: Aug 28, 2013
  8. Brandonclowe

    Brandonclowe New Member

    Joined:
    May 11, 2013
    Messages:
    41
    Likes Received:
    0
    [​IMG][​IMG][​IMG][​IMG][​IMG]
     
    #48 Brandonclowe, Aug 28, 2013
    Last edited: Aug 28, 2013
  9. Brandonclowe

    Brandonclowe New Member

    Joined:
    May 11, 2013
    Messages:
    41
    Likes Received:
    0
    [​IMG][​IMG][​IMG]coustom hitch[​IMG][​IMG]
     
  10. Brandonclowe

    Brandonclowe New Member

    Joined:
    May 11, 2013
    Messages:
    41
    Likes Received:
    0
    :seriousbusiness:runnin brushless
     
  11. jaloos

    jaloos Mod, Staff Member and Ghetto Fabricator
    MODERATOR

    Joined:
    Oct 14, 2012
    Messages:
    2,959
    Media:
    133
    Likes Received:
    187
    Can I ask why you posted what is closer to a scaler than an actual comp crawler in a forum about comp crawlers?

    I have yet to see anything in a comp crawler that will do over maybe 5 miles an hour at best and by far nothing in a comp crawler that has so much weight up as high as you do.

    Examples of comp crawlers.

    [​IMG]

    [​IMG]

    [​IMG]

    I think what you are looking for is a scaler or even a formula off road. It is plainly evident you are not looking for comp crawling advice.
     
    #51 jaloos, Aug 28, 2013
    Last edited: Aug 28, 2013
  12. Brandonclowe

    Brandonclowe New Member

    Joined:
    May 11, 2013
    Messages:
    41
    Likes Received:
    0
    well ill go for comp/mudder what turn motor :yaehamnotdurnk:
     
    #52 Brandonclowe, Aug 28, 2013
    Last edited: Aug 28, 2013
  13. Brandonclowe

    Brandonclowe New Member

    Joined:
    May 11, 2013
    Messages:
    41
    Likes Received:
    0
  14. Koreyh2010

    Koreyh2010 Studio Forums Elite
    ELiTE MEMBER

    Joined:
    May 21, 2013
    Messages:
    303
    Likes Received:
    5
    Lets see some video!
     
  15. Brandonclowe

    Brandonclowe New Member

    Joined:
    May 11, 2013
    Messages:
    41
    Likes Received:
    0
    i didnt run the brushless. but i got a few stock vids.
     

Share This Page