Separate names with a comma.
Discussion in 'Studio Discussions' started by flyro1000, Aug 18, 2014.
okay but do i need a 3 pin to usb?
as there £20... as much as the bec
If you have a hobby shop around they should do it for you.
Or if you know anyone running castle esc they will prob have one
okay thanks... if my mate doesnt have one i'll drop the local hobby shop a email. Thanks
Your servo has a max of 6 volts, your Rx on the other hand has a max of 9 volts. Always check the Servo Voltage rating and the Rx Voltage rating before programming your BEC and use the lowest rating as a Max Voltage input. So in your case 6 Volts Max form BEC... The Amp draw from your Servo is what's causing the brown outs 99% sure. Savox doesn't give an Amp rating on their web site, but a 10 Amp BEC is the cure...
okay so the bec will cure the brownouts.... as i dont have a connector how will my servo run at 5.1v?
It should work fine, but it will be a little slower and not have as much torque...
will it be noticeable?
just got the bec installed and its fixed the browning out..... thanks guys
Excellent now get out there and run
ahah yeah... i also got my winch working
The bec should really help that out as well.
yep ahaha thanks again