1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Sharper Image DX2 help.

Discussion in 'Pilots Lounge' started by dgscheidegger, Dec 31, 2016.

  1. dgscheidegger

    dgscheidegger Member

    Joined:
    Feb 2, 2016
    Messages:
    11
    Likes Received:
    8
    I didn't see a section for drones, if I missed it please move this.

    I was given the above mentioned drone for Christmas this year. This is my first drone. I would like some help and guidance on adjusting trims. The controller has push buttons for adjusting these, but I am not seeing any improvement. When slowly powering up the drone to get it to hover a little off the ground it lifts one side and slides across the floor. It seems as if two propellers spin faster and start spinning before the other two. Thanks in advance!
     
  2. 00whynot

    00whynot Moderator
    Staff Member MODERATOR

    Joined:
    Jun 19, 2011
    Messages:
    3,861
    Media:
    18
    Likes Received:
    1,130
    i have no experience with this drone. but try to center your trims . turn on the controller first. then the copter. get it up in the air before you try to trim it. there is allot of turbulence near the ground that causes a ground effect and makes it unstable. get it up in the air before making any adjustments.
    also check for any hair around the props.
     

Share This Page