1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

slash 2wd receiver problem

Discussion in 'Race - Electronics' started by SEAL, May 29, 2013.

  1. SEAL

    SEAL New Member

    Joined:
    May 21, 2013
    Messages:
    17
    Likes Received:
    0
    Ok right when i got my slash and drove it around till the battery died. While i was driving it stopped then started while i was driving and it wouldn't go in revers unless i tried 2. So i opened it up and the wire was manufactured withe wires rubber part gone with a cut.The reason for this i dont know but i put electrical tape over it but it still stops once and while. Is there any thing to help fix it or should i buy a new receiver. if so pleas tell me. Also if it is a new receiver you recommend what kind.
     
  2. Mowgli

    Mowgli Studio Forums Elite
    ELiTE MEMBER

    Joined:
    Jan 26, 2013
    Messages:
    413
    Likes Received:
    4
    If you got the truck new it should be covered under warranty, I'd contact traxxas I'm sure they'll send you a new one, you'll probably have to send the bad one in though.
     
  3. SEAL

    SEAL New Member

    Joined:
    May 21, 2013
    Messages:
    17
    Likes Received:
    0
    k thanks a lot i appreciate the help
     
  4. Mowgli

    Mowgli Studio Forums Elite
    ELiTE MEMBER

    Joined:
    Jan 26, 2013
    Messages:
    413
    Likes Received:
    4
    No problem dude, we're all there to help if we can.
     

Share This Page