1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Some globeliner and rc kit questions..

Discussion in 'Highway Trucks & Trailers' started by Tigercat, Sep 14, 2019.

  1. Tigercat

    Tigercat New Member

    Joined:
    Sep 14, 2019
    Messages:
    4
    Likes Received:
    0
    Hello my name is JT

    My globeliner should arrive anyday now

    My questions are

    #1 I'd like to replace the stock motor with a low turn crawler motor.. 35 maybe?

    what turn motor do you recommend?

    #2 I'd like to use a high torque waterproof servo for steering, I was thinking about using the "twister high torque metal gear servo" from rcw4d..

    anybody have any experience with this servo?

    #3 I'd also like to use a waterproof crawler esc that's 2s lipo friendly with a drag brake.. maybe a tekin bxr?

    Any recommendations?

    #4 I'm thinking about using a flysky i10 or a flysky nirvana 14ch with an ia8x receiver..

    Will those parts work together?

    This is my first rc kit, so any help would be greatly appreciated..
     
  2. walter

    walter Studio Forums Elite
    ELiTE MEMBER

    Joined:
    Jan 8, 2013
    Messages:
    4,176
    Likes Received:
    2,341
    welcome to the forums.
    the 35 turn motor should be good . the twister servo will work. a hobby wing 1080 esc is very good.
     
    Tigercat likes this.
  3. Tigercat

    Tigercat New Member

    Joined:
    Sep 14, 2019
    Messages:
    4
    Likes Received:
    0
    Thanks Walter, I think I am gonna use a hobby wing 1080 like you suggested...

    So I shouldn't have any issues with a flysky i10 or nirvana being able to control this setup?

    I'm fairly ignorant when it comes to radio/ receivers and frequencies and what not..
     
  4. walter

    walter Studio Forums Elite
    ELiTE MEMBER

    Joined:
    Jan 8, 2013
    Messages:
    4,176
    Likes Received:
    2,341
    ether should work
     
    Tigercat likes this.
  5. Tigercat

    Tigercat New Member

    Joined:
    Sep 14, 2019
    Messages:
    4
    Likes Received:
    0
    Thanks man, I'll get to ordering some parts later after work..

    Now if only I could decide on a paint scheme for it..
     
  6. Tigercat

    Tigercat New Member

    Joined:
    Sep 14, 2019
    Messages:
    4
    Likes Received:
    0

Share This Page