1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Summit/traxxas radio with bec wiring.

Discussion in 'ESC's, Wiring & Batteries' started by yp.sebastian, Apr 22, 2019.

  1. yp.sebastian

    yp.sebastian New Member

    Joined:
    Apr 10, 2019
    Messages:
    1
    Likes Received:
    0
    I've attached 3amp bec to my rx8 which works wonder with flysky nb4 and receiver on trx4 w/ roc412, but on my ezrun 4274 summit with trx radio and receiver it isn't working. It didnt even bind when I plug the main esc wires to the receiver and it only did when I plug the bec wires into main esc which usually is the 3rd from bottom due to summit dual steering servos. Was able to bind and power come live as said when only bec wire is plugged in. Any help will be appreciated.

    Sent from my SM-N950F using Tapatalk
     
  2. summitnut

    summitnut Super Moderator
    SUPER MODERATOR

    Joined:
    Jan 28, 2011
    Messages:
    2,308
    Media:
    1
    Likes Received:
    707
    The bec is powering the rx when you are bypassing the internal bec.
    So it needs to be plugged in or the rx gets no power to function.
    It can go in any open ch

    Sent from my SM-G900W8 using Tapatalk
     

Share This Page