1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

OTHER Traxxas Revo 3.3 Complete Rebuild Info Needed

Discussion in 'RC Chat, Tutorials, Ideas, Requests, Etc' started by thezombiedog, Feb 6, 2020.

  1. thezombiedog

    thezombiedog Studio Forums Elite
    ELiTE MEMBER

    Joined:
    Sep 23, 2011
    Messages:
    109
    Likes Received:
    3
    So, I have a Traxxas Revo 3.3 Nitro Truck and I have completely tore it down to the bare chassis, anyways I am rebuilding it because it was very very dirty and I want to make it look as good as possible. Anyways I just have a few inquires with that. One thing I want to know is when I put the drive shafts back together do I need to add oil to the inside of the sleeves and the shaft that slides in or just make sure it is clean before I glue new boots onto them.

    Just so you guys know what I'm dealing with I uploaded a video to YouTube on the Teardown I will link here, here are also a couple pictures of the chassis before and after.

    Before
    20200128_153951_HDR(1)_compress50.jpg

    After
    20200128_163637_HDR(1)_compress71.jpg

     
    #1 thezombiedog, Feb 6, 2020
    Last edited: Feb 6, 2020

Share This Page