1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

AXIAL Winch wiring

Discussion in 'Scale Truck Chat' started by RCaddictFromCT, Jan 17, 2016.

  1. RCaddictFromCT

    RCaddictFromCT New Member

    Joined:
    Jan 11, 2016
    Messages:
    12
    Likes Received:
    0
  2. Y2daT

    Y2daT Over Powered RC
    ELiTE MEMBER

    Joined:
    Dec 25, 2013
    Messages:
    4,056
    Likes Received:
    1,091
    got a error code .... from the link
    .
    there are a few ways to do it .... there are different winch controllers ...some with a remote some rx controlled some hard wired ....
    .
    a brushed ESC can be used to tx control a winch ... but you need 3 or more channels on your tx ....
    if all you have is a stock 2ch controller then one of the other options will be better ...
     
  3. RCaddictFromCT

    RCaddictFromCT New Member

    Joined:
    Jan 11, 2016
    Messages:
    12
    Likes Received:
    0
    I have a FlySky 3 channel, and I was thinking about using a Turnegy 20A ESC
     

Share This Page