1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

XR10 2 Screw Mod

Discussion in 'Comp Mods & Fabrication' started by jaloos, Dec 16, 2013.

  1. jaloos

    jaloos Mod, Staff Member and Ghetto Fabricator
    MODERATOR

    Joined:
    Oct 14, 2012
    Messages:
    2,959
    Media:
    133
    Likes Received:
    187
    With permission from Mark Reel I have copied his how to on the 2 screw mod and started a thread for it.


    I did this to make it easier to search for and to be able to link people to it allot easier.




    ok here is a detailed post of this mod that has allowed my stock gears to last over a year.


    the second screw is a 4-40 with a losi min alum nut.
    just tighten these snug do not over tighten them as the plastic will just keep giving
    a long screw was used for better viewing, use a short screw that comes up just past
    the gold alum locknut.


    also replaced the end of the axle (pic # 13) small 5 x 8 bearing to a Bushing (as i had one bearing explode on me and then break the gears.


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]
     
  2. Crankbait

    Crankbait Think...
    ELiTE MEMBER

    Joined:
    Dec 22, 2011
    Messages:
    4,427
    Likes Received:
    57
    Great idea!
    This basic type of mod is a great idea for the SCX10 axles too.
     

Share This Page